Part of our interior painting guide.
Why paint will not stop mould
Mould grows where surfaces stay damp: bathroom ceilings, cold external walls, behind furniture and around windows with condensation. Paint over the top seals moisture and spores in, and the mould soon reappears through or under the new coat. The moisture is the real problem.
Step 1: fix the moisture
- Use extractor fans in bathrooms and kitchens, and run them long enough to clear steam.
- Open windows or use trickle vents to air rooms daily.
- Wipe condensation off windows in the morning.
- Move furniture slightly away from cold external walls.
- Fix leaks from roofs, plumbing or showers.
Step 2: kill and clean the mould
- Protect yourself with gloves, eye protection and a mask, and ventilate the room.
- Apply a mould killer made for interior surfaces, following the label.
- Wipe or scrub off the dead mould, then wash with sugar soap and rinse.
- Let the surface dry completely.
For large areas, mould inside wall linings or after flooding, get specialist advice. WorkSafe recommends seeking competent help for mould clean-up after a flood or natural event.
Step 3: prime and repaint
Seal any remaining dark staining with a stain-blocking primer so it does not show through. Then apply two coats of a paint suited to damp areas; many kitchen and bathroom paints include a mould inhibitor. A low-sheen or semi-gloss finish is easier to wipe clean than flat.
See painting a bathroom ceiling for moisture-prone rooms and how to paint a ceiling for the technique.
Keeping mould away
Even the best paint only resists mould; it cannot beat constant damp. Keep ventilating, clean early signs with a mould wash, and check behind furniture each season. Our guide to cleaning painted walls explains safe cleaning for each sheen.
Mould around windows and in wardrobes
Cold aluminium window frames collect condensation, which runs onto sills and reveals. Wipe frames dry, keep drainage holes clear and treat mould on reveals before repainting. In wardrobes on outside walls, leave a gap behind clothes and open the doors regularly.
Choosing a primer and paint after mould
Once the surface is clean and dry, use a stain-blocking primer over any marks that remain, so they do not bleed through the new paint. For the top coats in bathrooms, kitchens and laundries, choose a paint made for wet areas with a mould inhibitor, such as Resene's kitchen and bathroom range. These finishes resist mould growth on the paint film, but they do not stop condensation, so ventilation still matters.
Will the mould come back after painting?
It will if the moisture is still there. Paint with a mould inhibitor slows regrowth on the surface, but a room that stays damp will grow mould again, often on furniture, curtains and window frames. Run extractor fans during and after showers and cooking, open windows daily, and fix leaks before you repaint. Our painting a bathroom ceiling guide covers paint choice for wet rooms.
Your questions
Will mould-resistant paint kill existing mould?
No. Treat and clean the mould first. Mould-resistant paint helps stop it returning.
Can I just use bleach and paint?
Use a mould killer made for interior surfaces and follow its label, then clean, dry and prime before painting.
Why does mould keep coming back on my ceiling?
The room is staying damp. Improve ventilation and fix leaks, or mould will return through any paint.
Mouldy bathroom or bedroom walls?
Send photos and tell us how the room is ventilated. We will treat, prepare and repaint, and give you a free quote.
Request a free quoteAbout this guide
We are Gary Dyer Painters and Decorators, a trade-qualified Manawatū painting company, Master Painters members and certified Resene Eco-Decorators. We repaint bathrooms, kitchens and damp-prone rooms across Manawatū. This guide was last reviewed in November 2026. Mould clean-up guidance references WorkSafe's advice; this is general information, not health advice. If anything here needs correcting, email gary@gdpd.nz.

