What industrial painting is
Industrial painting protects surfaces that work hard: plant and equipment, steelwork, factory walls and floors, and areas exposed to weather, wear or chemicals. The coating is chosen first for protection and durability, then for appearance.
We have applied protective coatings to surfaces such as an outdoor swimming pool, shown in our work.
Surface preparation and coating systems
Most coating failures start with poor preparation. We clean, remove loose material, treat rust or contamination and profile the surface so the coating can bond. Then we apply a system matched to the substrate and its exposure, usually a primer, build coats and a topcoat, at the film thickness the manufacturer specifies.
Water blasting is part of our preparation where the surface suits it.
Airless spraying for large areas
Airless spraying applies coatings quickly and evenly over large or complex surfaces. Once the area is masked, it reduces time on site, which matters when a building or line needs to be back in use. Our guide to spray painting vs roller explains where each method works best.
Safety on industrial sites
We hold SiteWise Gold, an independent health and safety assessment, and plan each job around the site's own rules, access at height and the products being used. Tell us about permits, inductions and areas that must stay running.
Planning an industrial coating job
- What the surface is and what it is exposed to (weather, traffic, chemicals, water).
- The condition of any existing coating.
- Access, working hours and shutdown windows.
- Any coating system specified by an engineer or manufacturer.
For offices, shops and building exteriors, see commercial painters in Palmerston North.
Common industrial coating jobs
| Surface | What the coating does |
|---|---|
| Steel structures and plant | Protects against corrosion |
| Concrete floors and walls | Resists wear, chemicals and dust |
| Tanks and pools | Seals and protects from water |
| Factory and warehouse interiors | Durable, cleanable finish |
Each job needs a coating system chosen for the substrate and exposure. Tell us what the surface is and how it is used.
Commercial vs industrial painting
Commercial painting is mostly about appearance in offices, shops and building exteriors. Industrial painting is about protection: coatings chosen for durability, corrosion resistance or chemical resistance, often applied to a specification. We do both: see commercial painters.
Choosing an industrial painter
- Can they show experience with your type of surface?
- Will they apply to the coating maker's specification and film thickness?
- How do they prepare surfaces, and what equipment do they use?
- What health and safety systems do they hold? We hold SiteWise Gold.
- Can they work around your operations and shutdowns?
Your questions
Do you work to a specified coating system?
Yes. Send us the specification and we will price and apply to it.
Can you coat while the site is operating?
Often, with planning. Tell us which areas must stay in use and when shutdowns are possible.
Where do you work?
Greater Manawatū and surrounding districts.
Talk to us about industrial coatings
Tell us about the surfaces, conditions and timing, or call Gary on 027 275 8574 to arrange a site visit and free quote.
Enquire about industrial coatings
