Part of our exterior house painting guide.
Check the material and the finish first
| Door | Preparation | Primer |
|---|---|---|
| Pre-finished steel (sectional or roller) | Wash, rinse, sand lightly to dull the gloss | Adhesion primer suited to pre-finished steel |
| Galvanised steel | Clean and degrease | Primer made for galvanised surfaces |
| Aluminium | Clean and degrease, light sand | Primer made for aluminium |
| Timber | Sand, fill, seal end grain | Timber primer on bare wood |
Some door makers set their own coating rules for warranty, so check your door's care information before you start.
How to paint a garage door
- Wash with a mild detergent, rinse and let it dry.
- Remove loose or flaking paint and sand edges smooth. Our peeling paint guide explains why.
- Mask the seals, handles and the edges of the frame.
- Spot-prime any bare metal or timber.
- Paint panel by panel: recessed areas first, then the flat faces, keeping a wet edge.
- Apply a second coat after the recoat time on the label.
- Leave the door closed until the paint is dry enough not to stick.
Gloss or satin for a garage door?
Semi-gloss or satin is the usual choice: it resists marks and washes well. Gloss highlights every dent in a steel door. Dark colours make metal doors hot in full sun, so check the door maker's colour guidance. See our paint finishes guide.
How much paint for a garage door?
Measure the width and height, multiply, and double it for two coats. A typical single door is a small area, so a few litres usually covers it. Our paint calculator guide explains coverage.
A smooth finish from our spray booth
We spray doors off site in our own spray booth for a smooth, even finish. If your garage door panels or a timber door can be removed, ask us about door spray painting. Garage doors are also part of a full exterior repaint.
Colour ideas for garage doors
Matching the garage door to the wall colour makes a large door recede; matching it to the trim or joinery ties the house together. A darker accent works on light houses, but check the door maker's guidance for dark colours on metal in full sun. See exterior paint colours.
Worked example: paint for a single garage door
Measure your own door, because sizes vary. As an example, a door 2.4 m wide and 2.1 m high is about 5 m² on the outside face. Two coats means 10 m² of painting. At an example coverage of 12 m² per litre (check the figure on your tin), that is a little under 1 litre of topcoat, plus primer for any bare areas. A double door needs about twice as much.
Your questions
Can you paint a Colorsteel or pre-finished garage door?
Usually yes, with cleaning, light sanding and a suitable adhesion primer. Check the door maker's guidance first.
Should I use a roller or brush?
A small roller for flat panels and a brush for recesses and edges works well.
How long before I can use the door?
Wait until the paint is dry to the touch and firm, as the label says, before opening and closing it.
Want your garage door done properly?
Send a photo of the door and tell us the material. We will quote it on its own or as part of an exterior repaint.
Request a free quoteAbout this guide
We are Gary Dyer Painters and Decorators, a trade-qualified Manawatū painting company, Master Painters members and certified Resene Eco-Decorators. We paint exteriors and spray doors in our own booth. This guide was last reviewed in November 2026. Spotted something out of date? Email gary@gdpd.nz.

