GDPD / Practical decorating advice

How to Paint Window Frames: Timber and Aluminium Joinery

To paint window frames, clean and sand them, fill and prime any bare timber, mask or cut in against the glass, then apply two thin coats of a hard-wearing gloss or semi-gloss. Leave opening sashes ajar until the paint is dry so they do not stick.

For homeowners repainting timber or aluminium windows, inside or out.

Request a free quote
White home exterior after a residential repaint by GDPD
White home exterior after a residential repaint by GDPD

Part of our exterior house painting guide.

Timber or aluminium?

Window frame preparation by material
FramePreparationFinish
TimberScrape loose paint, sand, fill, prime bare woodTwo coats of exterior acrylic gloss or semi-gloss
Aluminium (powder-coated or anodised)Clean, degrease, light sandPrimer suited to aluminium, then acrylic topcoats

Painted aluminium no longer has its factory finish, so check whether that matters for any joinery warranty first.

How to paint timber window frames step by step

  1. Remove handles and stays, or mask them.
  2. Scrape off loose paint and sand edges smooth. On older homes, treat old paint as possibly lead-based: see our lead paint guide.
  3. Rake out cracked putty or sealant and replace it.
  4. Fill gaps and holes, sand flush and dust off.
  5. Prime bare timber and filler.
  6. Cut in against the glass with a good angled brush, letting the paint overlap the glass by a hair to seal the join.
  7. Paint in order: glazing bars, sash, then frame and sill.
  8. Apply a second coat after the recoat time.

Inside vs outside

Outside frames face sun and rain, so preparation and primer matter most. Inside, frames suffer condensation, so mould needs treating before painting: see can you paint over mould. A semi-gloss finish wipes clean on both sides.

Drying before you close the window

Opening sashes stick if they are shut on fresh paint. Leave them ajar until the paint is firm, and check the label for recoat and full-cure times. Our drying times guide explains the difference.

Joinery as part of a repaint

Window frames are slow, detailed work, which is why they are often priced separately in a repaint. If you want a neat, consistent result across the house, include them in your quote. See painting skirting boards for the same trim techniques inside.

Tools for painting window frames

  • A good-quality 38 to 50 mm angled sash brush.
  • Sandpaper and a sanding block.
  • Filler, putty or sealant to suit the frame.
  • Masking tape if you prefer.
  • A scraper or razor blade to clean paint off glass afterwards.

Your questions

Should I use tape on window glass?

Tape helps beginners. A steady hand and a good brush, letting paint just meet the glass, seals the join better.

Can you paint aluminium window frames?

Yes, with cleaning, light sanding and a primer made for aluminium.

How long before I can close a freshly painted window?

Leave it ajar until the paint is firm, usually several hours or longer in cool weather.

Get your windows and trim painted

Send photos of your joinery and tell us whether it is timber or aluminium. We will include it in a free quote.

Request a free quote

About this guide

We are Gary Dyer Painters and Decorators, a trade-qualified Manawatū painting company, Master Painters members and certified Resene Eco-Decorators. We restore and repaint timber joinery on older and newer homes. This guide was last reviewed in November 2026. Spotted something out of date? Email gary@gdpd.nz.