Part of our exterior house painting guide.
What makes an exterior paint the best for NZ conditions
New Zealand's high UV, coastal salt and wet winters are hard on paint. A good exterior paint stays flexible as timber moves, resists fading and mould, and lets moisture escape rather than trapping it. Premium acrylics do all of this well, which is why they are the default for weatherboards, fibre-cement and plaster.
We use premium, shelf-line products on our jobs. Cheaper paints usually have fewer solids, so they cover less and need recoating sooner.
Acrylic vs oil-based exterior paint
| Waterborne acrylic | Solventborne (oil-based) enamel | |
|---|---|---|
| Flexibility | Stays flexible as timber moves | Becomes harder and more brittle with age |
| Colour and gloss over time | Holds colour well | Can chalk and yellow |
| Best for | Walls, weatherboards, most trim | Some high-wear trim and metal, on specification |
| Clean-up and odour | Water, low odour | Solvents, stronger odour |
Painting over old oil-based paint needs the right preparation. See water based paint over oil based paint.
Best paint for weatherboards
Timber weatherboards need a paint that moves with the timber and sheds water. A low-sheen or semi-gloss acrylic is usual: low sheen hides the texture of older boards, semi-gloss is easier to keep clean. Bare timber needs a timber primer first. Our guide to painting weatherboards covers preparation in detail.
Dark colours on timber
Dark paint heats timber in the sun, which can cause warping, cracking and resin bleed. Resene notes that timber cladding suppliers usually require colours with a light reflectance value (LRV) of 45% or more, and some 50%. Paints made with heat-reflective pigments, such as Resene CoolColour, reduce heat build-up but do not override a cladding supplier's LRV limit. Read exterior paint colours before choosing a dark scheme.
Matching the paint to the surface
- Weatherboards and timber trim: timber primer on bare wood, then acrylic topcoats.
- Brick, block and concrete: a masonry sealer, then a masonry acrylic. See painting a brick house and painting concrete walls.
- Fibre-cement: follow the cladding maker's coating requirements.
- Metal and garage doors: a primer suited to the metal. See painting a garage door.
Sheen levels outside
Flat and low sheen hide surface flaws and suit walls. Semi-gloss and gloss are tougher and easier to wash, so they suit joinery, doors and trim. Our paint finishes guide explains each level.
Coastal and high-UV homes
Salt spray and strong sun break paint down faster. Wash coastal homes regularly to remove salt, choose a quality acrylic system and lighter colours where you can, and check fixings and metal flashings for corrosion before painting.
Our exterior paint checklist
- Identify the cladding and its maker's coating rules.
- Check the condition of the existing paint.
- Choose a primer for any bare or repaired areas.
- Pick topcoat sheen by surface.
- Check LRV for dark colours on timber.
- Plan for settled weather.
Paint types you will see on the shelf
| Type | Typical use |
|---|---|
| Low-sheen acrylic | Weatherboards and walls where you want texture to show less |
| Semi-gloss acrylic | Weatherboards and trim that need easy cleaning |
| Gloss acrylic enamel | Doors, joinery and trim |
| Masonry acrylic | Brick, block, concrete and plaster |
| Heat-reflective versions of dark colours | Dark schemes on suitable claddings |
For timber weatherboards, Resene suggests its Lumbersider (low sheen) or Sonyx 101 (semi-gloss), with its CoolColour versions for darker colours. We are Resene Eco-Decorators and can talk you through the options for your cladding.
Your questions
What is the best exterior paint for NZ weather?
For most surfaces, a premium 100% acrylic system over the right primer. It handles UV, moisture and timber movement well.
How long does exterior paint last in NZ?
It depends on the system, colour, exposure and preparation. Sunny and coastal walls wear faster; regular washing helps paint last longer.
Can I use a dark colour on weatherboards?
Check the cladding supplier's LRV requirement first. Many timber suppliers ask for an LRV of 45% or more.
Get the right paint system for your home
Tell us your cladding, colours and the condition of the current paint. We will recommend a system and give you a free quote.
Request a free quoteAbout this guide
We are Gary Dyer Painters and Decorators, a trade-qualified Manawatū painting company, Master Painters members and certified Resene Eco-Decorators. We repaint homes across Manawatū using premium paint systems. This guide was last reviewed in November 2026. Paint guidance follows Resene's published advice on light reflectance values and exterior systems. Spotted something out of date? Email gary@gdpd.nz.

